Insignia
Tape Remaining
This function shows the time remaining on the tape during recording or playback. Press CLK/CNT repeatedly until the REM indicator appears on the television screen during recording or playback.
Note
The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (such as
Additional Information
•In manual recording, Timer Recording, Instant Timer Recording, Playback, or Fast Forward modes, the home theater system automatically starts rewinding the tape at the end of the tape. The tape stops at the beginning of the tape and is ejected, and the home theater system turns itself off.
•After you have finished using the home theater system, rewind, eject, and remove the tape. Place the tape in its protective sleeve to protect it from dust. It is not necessary to rewind the tape before removing it, but if you do, it will be ready to play or record the next time you use it.
•Make sure that the home theater system channel selector is on the correct channel you want to record. The channel that is being recorded can always be checked by tuning the television to the home theater system channel (3 or 4) and using the TV/VCR button to turn the home theater system’s TV indicator off.
•Do not attempt to hook up more than one television set to the home theater system for either recording or playback.
Auto Play System
This home theater system features automatic playback when you load a tape with the safety tab removed.
•The output source changes to VCR mode automatically.
•The power turns on automatically and playback begins.
•At the end of the tape, the home theater system stops and rewinds the tape.
•The tape is ejected after rewinding and the VCR turns itself off automatically.
Playing a DVD
To play a DVD:
1Turn on the television and select the video input source connected to the DVD player.
2Turn on the audio system and select the input source connected to the DVD player.
3Press OPEN/CLOSE 
to open the disc tray.
4Load your DVD in the tray, with the label side facing up.
5Press OPEN/CLOSE 
to close the tray.
READING appears on the television screen, and playback starts automatically. If playback does not start, press PLAY 
.
In some cases, the DVD menu might appear instead.
Tip
The menu screen may be displayed first after loading a DVD which offers a menu.
6Press the 
, 
, 
, or 
buttons to select the title/chapter you want to view, then press MEMORY/ENTER to start playback.
7Press TITLE or DISC MENU to return to the menu screen.
Note
•If Parental Control is set and the DVD is not within the Rating settings (not authorized), you must enter the
•DVDs may have a regional code. Your DVD player cannot play DVDs that have a regional code different from your player. The regional code for this player is one (1) For more information, see “Regional codes” on page 6.
Note
Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
Moving to another title
When a DVD has more than one title, you can move to another title.
To move to another title: 1 Press DISPLAY.
LOAD |
| AUTO | AUTO |
AUTO | AUTO |
| |
| POWER | ||
PLAY | REWIND |
| |
| OFF | ||
TAPE |
| EJECT | |
|
|
Note
Auto power off does not function during regular DVD Play mode. (Home theater system power stays on.)
Using the DVD player
Note
may appear on the television screen during operation. This icon means the function explained in this user guide is not available on that specific DVD.
2Press the appropriate number button
Moving to another chapter or track
When a title on a DVD has more than one chapter or a CD has more than one track, you can move to another chapter or track.
To move to another chapter or track:
•Press 
or 
briefly during playback to select the next chapter or track or to return to the beginning of the current chapter or track.
•Press 
twice briefly to step back to the previous chapter or track.
24 |