Insignia NS-HZ308/NS-HZ308-C setup guide

Thank you for purchasing this high-quality Insignia

RF Modulator. This product is designed to connect AV

components with no RF (coaxial) output, such as

Blu-ray/DVD players, gaming systems, etc., to an

older TV that has only an RF input.

• RF Modulator

• Power adapter

• Quick Setup Guide

The following items (not supplied) are required:

• One composite AV cable with three RCA

connectors (yellow, red, and white) at each end.

• One 75-ohm coaxial cable

1 Connect a composite AV cable (not included) from

the AV output jacks (yellow for video; red and white

for stereo audio) of the source component

(Blu-ray/DVD player, gaming system, etc.) to the

corresponding color-coded input jacks on the

RF Modulator.

Note: For mono AV components, use only the yellow and

white connectors of the composite AV cable.

2 Connect the coaxial cable to the TV using one of the

following methods that matches your setup:

• If you have an RF TV source, such as a cable/satellite

box or TV antenna, connected to the TV, disconnect

that component from the TV and connect the coaxial

cable to the ANT IN jack on the RF Modulator.

Connect a separate coaxial cable from the TO TV

jack on the RF Modulator to the RF input jack on the TV.

• If you do not have an RF TV source, connect a

coaxial cable from the TO TV jack on the

RF Modulator to the RF input jack on the TV.

Note: If your TV has only 300-ohm VHF screw terminals,

use a 75-ohm-to-300-ohm matching transformer to

complete the connection.

ANT IN TO TV

CH 3/4

VIDEO IN DC IN

AUDIO IN

Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.