11
www.insigniaproducts.com
Connecting cable TV via a cable TV box
1Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
2Depending on the jacks available on the cable
box, connect a cable from the outgoing jacks on
the cable box to the corresponding jacks on the
back of your TV. The connection can be to the
cable-out, HDMI, component video, S-Video, or
AV jack .
3If you use a component video, S-Video, or AV
cable, connect an audio cable to the
corresponding jacks on the back of your TV and
on the cable box.
Connecting satellite TV via a satellite TV box
To con ne ct sat el lit e T V:
1Connect the incoming cable from the satellite
wall jack to the satellite-in jack on the satellite
box.
2Depending on the jacks available on the satellite
TV receiver (set-top box), connect a cable from
the outgoing jacks on the satellite box to the
corresponding jacks on the back of your TV. The
connection can be to the HDMI, component
video, S-Video, or AV jack.
3If you use a component video, S-Video, or AV
cable, connect an audio cable to the
corresponding jacks on the back of your TV and
on the satellite box.
Connecting a VCR
To connect a VCR:
1Connect an AV cable to the AV IN 1 V IDEO and
AV IN 1 L and R audio jacks on the back of
yourT V.
2Connect the other end of the cable to the
VIDEO OUT and AUDIO OUT jacks on the VCR.
3Turn on your TV, then turn on the VCR.
4Press INPUT to open the Source List, then
press or to select AV1.
5Insert a videotape into the VCR, then press
PLAY.
Back of TV
HDMI
Video or S-Video
Component
Cable box
Back of TV
Satellite receiver
Video or S-Video
Component
HDMI
Note
If a device is connected to the S-VIDEO jack, the
S-VIDEO jack controls the AV IN 1 L and R jacks.
To assign the audio jacks to the AV IN 1 VID EO jack,
unplug the S-Video device.
Back of TV
VCR
NS-L37Q_L42Q-10A_10-0783_MAN_V4_English.book Page 11 Thursday, July 15, 2010 4:27 PM