Frymaster MRE14 SERIES warranty Problem, Probable Causes, Corrective Action, 6.2Troubleshooting

6.2Troubleshooting

6.2.1 Computer and Heating Problems

Problem	Probable Causes	Corrective Action
	A. Computer not turned on.	A. Press the ON/Off switch to turn
		the computer on.
		B. This fryer has two cords: a
		computer power cord and a main
		power cord. If the computer
	B. No Power to the fryer.	cord is not plugged in, the
		computer will not activate.
		Verify computer power cord is
		plugged in and that circuit
		breaker is not tripped.
No Display on	C. Computer has failed.	C. Call FASC.
Computer.	D. Damaged computer wiring	D. Call FASC
	harness.
		E. If any component in the power
		supply system (including the
		transformer and interface board)
	E. Power supply component or	fail, power will not be supplied
		to the computer and it will not
	interface board has failed.
		function. Determining which
		component has failed is beyond
		the scope of operator
		troubleshooting. Call FASC.
		A. A drain safety switch prevents
		the heating element from being
	A. Drain valve is open.	energized if the drain valve is
		not fully closed. Verify that the
		drain valve is fully closed.
	B. Computer has failed.	B. Call FASC.
		C. This fryer has two cords: a
		120V power cord and the main
Fryer does not heat.		3-phase power cord. If the 120V
		power cord is plugged in but the
		main power cord is not, the
	C. Main power cord not plugged in.	computer will appear to work
		normally, but the fryer will not
		heat. Verify that both the main
		power cord and 120V is fully
		seated in its receptacle, locked
		into place and that circuit
		breaker is not tripped.

6-2