Ryobi RY43006 manual Troubleshooting, Parts List, Problem, Cause, Solution, Number, Description

TROUBLESHOOTING

PROBLEM			CAUSE		SOLUTION
	Bar and chain running hot	1.	Check chain tension for	1.	Tension chain. Refer to “Adjusting
	and smoking.		over tight condition		Chain Tension” earlier in this manual.
		2.	Chain oil tank empty.	2.	Check oil tank.
	Motor runs, but chain is	1.	Chain tension too tight.	1.	Retension chain, Refer to “Adjusting
	not rotating.	2.	Check guide bar and chain		Chain Tension” earlier in this manual.
			assembly.	2.	Refer to “Replacing Bar and Chain”
		3.	Check guide bar and chain		earlier in this manual.
			for damage.	3.	Inspect guide bar and chain for
					damage.
	Motor runs, chain rotates	1.	Dull Chain.	1.	Sharpen Chain.
	but does not cut.	2.	Chain on backwards.	2.	Reverse direction of chain.

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.

PARTS LIST

3

9

2

1

7

4
	8
			6
Key	Part		5
No.	Number	Description	Qty.
1	301139003	BAR 18in	1
2	301304001	CHAIN (Chain figure is for illustration puposes only)	1
3	512197001	OIL RESERVOIR CAP	1
4	308006004	SAFE-T-TIP®	1
5	301053001	CHAIN COVER ASSEMBLY	1
6	671307001	GUIDE BAR SLEEVE BUSHING	1
7	671306001	GUIDE BAR NUT	1
8	631055002	SCRENCH	1
9	660640001	SAFE-T-TIP®(screw and washer)	1
	983000640	OPERATOR’S MANUAL (960986002)

28