OPERATION

STARTING AND STOPPING THE CHAIN SAW

See Figure 8.

WARNING:

Keep body to the left of the chain line. Never straddle the saw or chain, or lean over past the chain line.

STARTING THE CHAIN SAW

n Make sure no objects or obstructions are in immediate vicinity which could come in contact with the bar and chain.

n Press and hold the switch lock. This makes the switch trigger operational.

n Press and hold the switch trigger, release the switch lock and continue to squeeze the switch trigger for continued operation.

STOPPING THE CHAIN SAW

NOTE: It is normal for the chain to coast to a stop once the trigger switch is released.

n Release the switch trigger to stop the chain saw.

n Upon release of the switch trigger, the switch lock will be automatically reset to the lock position.

Do not attempt to make any cut that would require removal of the SAFE-T-TIP®.

SWITCH LOCK

SWITCH TRIGGER

SWITCH LOCK

SWITCH TRIGGER

Fig. 8

14

Page 14
Image 14
Ryobi RY43006 manual Starting and Stopping the Chain SAW, Starting the Chain SAW