GENERAL SAFETY RULES

WARNING:

Do not attempt to operate this unit until you have read thoroughly and understand completely all instructions, safety information, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury.

READ ALL INSTRUCTIONS

BASIC SAFETY PRECAUTIONS

nDo not start cutting until you have a clear work area, se- cure footing, and a planned retreat path from the falling tree. Cluttered areas invite accidents.

nKeep ALL children, bystanders, visitors, and animals out of the work area while starting or cutting with the chain saw.

nDo not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

nWhen operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

nPolarized Plugs. To reduce the risk of electric shock, this tool has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

nMake sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 12 is recommended for an exten- sion cord 50 feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.

nInspect extension cords periodically and, if damaged, have repaired by a licensed electrician. Constantly stay aware of cord location. Following this rule will reduce the risk of electric shock or fire.

nWear snug fitting clothing. Always wear heavy, long pants, overalls, jeans or chaps made of cut resistant material or ones that contain cut resistant inserts. Wear non-slip safety footwear. Wear non-slip heavy duty gloves to improve your grip and to protect your hands. Do not wear jewelry,

short pants, sandals, or go barefoot. Do not wear loose fitting clothing, which could be drawn into the motor or catch the chain or underbrush. Secure hair so it is above shoulder level.

nWear eye protection which is marked to comply with ANSI Z87.1 as well as hearing and head protection when oper- ating this equipment.

nAlways be aware of what you are doing when using the chain saw. Use common sense. Do not operate the chain saw when you are tired, ill, or under the influence of al- cohol, drugs, or medication.

nDo not expose the chain saw to rain.

nDo not use the chain saw in damp or wet locations.

nAlways be aware of extension cord while operating chain saw. Take precautions to avoid tripping over cord. Keep cord away from chain and operator at all times. Never carry saw by the cord or pull it to disconnect from receptacle. Keep cord from oil and sharp edges.

nStay alert and pay attention to what you are doing. Use common sense when using this unit.

nKeep all parts of your body away from the saw chain when the unit is running.

nAlways carry the chain saw by the front handle with the unit unplugged and the guide bar and saw chain positioned to the rear. When transporting your chain saw, use the appropriate guide bar scabbard.

nNever let anyone use your chain saw who has not received adequate instructions in its proper use. This applies to rentals as well as privately owned saws.

nBefore you start the unit, make sure the saw chain is not contacting any object.

nStop the chain saw before setting it down.

nTo avoid accidental starting, never carry the unit with your finger on the switch trigger.

nMaintain the unit with care. Keep the cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories.

nKeep handles dry, clean, and free of oil and grease.

nDo not operate a chain saw with one hand! Use a firm grip with thumbs and fingers encircling the chain saw handles. Serious injury to the operator, helpers, bystanders, or any combination of these persons may result from one-handed operation. A chain saw is intended for two-handed use.

3

Page 3
Image 3
Ryobi RY43006 manual General Safety Rules, Read ALL Instructions Basic Safety Precautions