
Using the SmartThings Wifi/Hub
SmartThings Wifi/Hub
1 | Connect one end of the Ethernet cable to the hub’s WAN port (IN) and the other end to |
| the modem’s LAN port. |
2 | Connect the adapter to the SmartThings Wifi/Hub. |
| The SmartThings Wifi/Hub will turn on and the indicator light will flash green. |
Use only
•You can use the SmartThings Wifi/Hub only when you connect the SmartThings Wifi/Hub to an adapter.
•If the SmartThings Wifi/Hub temperature exceeds 55 °C, the internal fan will automatically activate
•If the SmartThings Wifi/Hub overheats for a prolonged period, the SmartThings Wifi/Hub may automatically turn off or reset. When this happens continually, disconnect the adapter from the SmartThings Wifi/Hub and contact a Samsung Service Centre.
•To save energy, unplug the adapter when not in use. The adapter does not have a power switch, so you must unplug the adapter from the electric socket when not in use to avoid wasting power. The adapter should remain close to the electric socket and be easily accessible while using it.
•The
Mobile device
3
4
Launch the SmartThings app on the mobile device.
Follow the
When you launch the SmartThings app, the
English (UK)
8
6