ArcSoft HERA110 manual To check wireless network status, Title bar, Wi-Fi Status screen

Getting Connected 185

To check wireless network status

You can check the current wireless connection status from any of the following screens of your device:

•Title bar.

When you enable Wi-Fi on your device, the Wi-Fi ON icon ( ) will appear on the title bar.

After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon ( ) appears on the title bar. The arrows in this icon will move back and forth while your device is scanning for a wireless network signal. Once your device successfully connects to a wireless network, the arrows stop moving.

•Wi-Fi Status screen.

Tap Start > Settings > Connections tab > Wi-Fi Status > Main tab to see the name of the wireless network that your device is currently connected to.

The configuration and signal quality of the wireless network are also shown.

•Configure Wireless Networks screen.

Tap Start > Settings > Connections tab > Wi-Fi > Wireless tab. This screen displays the wireless networks currently available.

To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect.

Tap a wireless network in the list to view or change its connection settings.

You can also add new wireless networks, if available, by tapping Add New.