ArcSoft HERA110 manual Dial-up and Other Connections, Work network connections

188 Getting Connected

To enable auto selection of an available connection

If you have created more than one GPRS/EDGE connection, you can set your device to connect to the best available connection automatically.

1.Tap Start > Settings > Connections tab > Connections.

2.Under T-Mobile Data, tap Manage existing connections.

3.Select Auto pick, then tap OK.

11.5Dial-up and Other Connections

Dial-up

When you use your device to dial up to your Internet Service Provider (ISP) and connect to the Internet, you will be billed by the number of minutes that you use.

To set up a dial-up connection to your ISP

To establish a dial-up connection on your device, you need the same settings that you normally use when you dial up from your computer. This includes the ISP server phone number, your user name and password.

1.Tap Start > Settings > Connections tab > Connections.

2.Under T-Mobile Data, tap Add a new modem connection.

3.On the Make New Connection screen, enter a name for the connection.

4.In the Select a modem list, select Cellular Line, then tap Next.

5.Enter the ISP server phone number, then tap Next.

6.Enter your user name, password, and any other information required by your ISP.

7.Tap Finish.

Work network connections

A Virtual Private Network (VPN) connection allows you to access your company network through your device’s Internet connection. Whereas a proxy connection lets you access the Internet using an existing connection to your corporate or WAP network.