ArcSoft HERA110 manual To save battery power while connected to a wireless network

186 Getting Connected

To save battery power while connected to a wireless network

Using Wi-Fi consumes battery power quickly. Turn off Wi-Fi when not in use. You can also enable power saving settings.

1.Tap Start > Settings > Connections tab > Wi-Fi Status.

2.On the Power Mode tab, move the Power Save Mode slider to a position that optimizes performance with the least power consumption.

For example, move the slider to the left (Best Performance) to have the optimal wireless network performance; move to the right (Best Battery) to obtain the maximum battery usage.

11.4GPRS/EDGE

Use GPRS/EDGE to connect to the Internet and to send and receive picture messages on your device. You will need a data plan to access the T-Mobile GPRS/EDGE network.

GPRS/EDGE settings are already preconfigured on your device, and your device is ready to use T-Mobile GPRS/EDGE services. Please do not change the settings as this may cause services to stop working.

To add a new GPRS/EDGE connection

In times when you need to add another GPRS/EDGE connection on your device, obtain the Access point name from your wireless service provider. Also, check if a user name and password are required.

1.Tap Start > Settings > Connections tab > Connections.

2.Under T-Mobile Data, tap Add a new modem connection.

3.On the Make New Connection screen, enter a name for the connection.