ArcSoft HERA110 manual Beam information using Bluetooth

Models: HERA110

1 258
Download 258 pages 44.07 Kb
Page 197
Image 197

Getting Connected 197

4.Tap the name of the Bluetooth headset, then tap Next.

5.Enter the passcode of the Bluetooth headset, then tap Next.

Note Common passcodes are 0000 and 1234. If these do not work, then refer to the headset documentation for the code.

6.Make sure the Hands Free check box is selected. If you have a Bluetooth stereo headset, also make sure Wireless Stereo is selected.

7.Tap Finish.

While the Bluetooth stereo headset is connected, the Headset icon ( ) will appear on the title bar.

Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Tap and hold the name of the Bluetooth stereo headset and tap Set as Wireless Stereo.

Beam information using Bluetooth

You can beam information, such as contacts, calendar items, and tasks, as well as files from your device to your computer or to another Bluetooth- enabled device.

Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer.

To beam information from your device to a computer

1.Turn on Bluetooth on your device, and make your device visible. For information about this, see “To turn Bluetooth on and make your device visible”.

2.Next, set Bluetooth on your computer to visible mode, create a Bluetooth partnership, then enable your computer to receive Bluetooth beams.

Page 197
Image 197
ArcSoft HERA110 manual Beam information using Bluetooth, Enter the passcode of the Bluetooth headset, then tap Next