ArcSoft HERA110 manual Connect a Bluetooth hands-free or stereo headset

196 Getting Connected

To accept a Bluetooth partnership

1.Ensure that Bluetooth is turned on and in visible mode.

2.Tap Yes when prompted to establish a partnership with the other device.

3.Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters.

4.Tap Next.

5.Tap Finish. You can now exchange information with the paired device.

Tips	•	To rename a Bluetooth partnership, tap and hold the partnership’s name
		on the Devices tab of the Bluetooth Settings screen, then tap Edit.
	•	To delete a Bluetooth partnership, tap and hold the partnership’s name on
		the Devices tab, then tap Delete.

Connect a Bluetooth hands-free or stereo headset

For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your device. Your device also supports A2DP (Advanced Audio Distribution Profile) which means that you can use a Bluetooth stereo headset for hands-free phone conversations and for listening to stereo music.

To connect a Bluetooth hands-free or stereo headset

1.Make sure that both your device and the Bluetooth headset are turned on and within close range, and that the headset is visible. Refer to the manufacturer’s documentation to find out how to set the headset in visible mode.

2.Tap Start > Settings > Connections tab.

3.Tap Bluetooth > Devices tab > Add new device. Your device searches for other Bluetooth-enabled devices and displays them in the list.