ArcSoft HERA110 manual Value. The live Camera

Experiencing Multimedia 211

lighting. To reduce flicker, you can change the flicker adjustment setting to Auto or to the proper frequency (50Hz or 60Hz) of the country where your device is being used.

•Record with Audio. Select On to record audio with the captured video clips. This is selected by default. If you select Off and then capture a video clip, it will have no audio.

•Prefix. Specify how to name captured images and video clips. When Default is selected, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example:

IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix.

•Counter. By default, captured image or video files are named with a prefix and some sequential numbers, such as 001, 002, and so on. To reset the numbering to “001” for your captured files, tap Reset.

•Recording Limit. Specify the maximum time or file size for recording.

•Template Folder (in Picture Theme mode only). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card.

•Adjust. This option allows you to adjust the camera display properties, such as Contrast, Saturation, Hue, and Sharpness.

1 1 Tap a property to adjust.

2 Tap the plus/minus icon or press NAVIGATION left/right to increase/decrease the

3	value. The live Camera
	screen on the background
4

5	immediately shows the effect
	of changes.
	3 Tap to save the settings.

24 Tap to reset all properties to their default.

5 Tap to close the submenu without applying and saving the changes.