ArcSoft HERA110 manual Connections tab

Getting Started 51

Connections tab

Icon Description

Beam Set your device to receive incoming Bluetooth beams.

Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices.

Comm Manager Manage your device’s connections (including Wi-Fi, GPRS, Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/vibration mode, and enable or disable the Direct Push function.

Connections Set up one or more types of modem connections for your device, such as phone dial-up, GPRS, Bluetooth, and more, so that your device can connect to the Internet or a private local network.

CSD Line Type Set the line type to use when making a circuit switch data (CSD) connection. Normally, you do not need to change the setting unless you encounter a problem on establishing a connection.

GPRS Setting Set the GPRS authentication method. This has been configured for the T-Mobile network.

USB to PC indicates a serial connection between your device and PC using a USB cable. See "Troubleshooting sync connection problem" in Chapter 5 for details.

Wi-FiScan for available wireless networks.

Wi-Fi Status See information about the active wireless network, and customize Wi-Fi settings.