ArcSoft HERA110 manual To use Voice Command, To place a call

234Using Other Applications

14.1Voice Command

Voice Command lets you make phone calls, open programs, play back music, get calendar information, and more, just by using your voice. It only responds to a set of predefined commands and does not allow you to record your own commands.

This section gives a few examples on how to use Voice Command. For more information, see Voice Command Help. To access the Help, tap Start > Settings > Personal tab > Voice Command then tap Start > Help.

To use Voice Command

1.Hold your device a few inches away from your mouth.

2.Press then release the VOICE COMMAND button that is located on the upper right side of your device.

You will then hear a sound, and you will see a Microphone icon on the title bar.

VOICE COMMAND button

3.In a clear voice, say a command. For example, say “Help“ to ask for information about using Voice Command.

4.Voice Command then asks you a question. Speak out your answer.

To place a call

You can call contacts that are stored on your device or SIM card, dial a phone number, redial, and place a return call.

1.Press then release the VOICE COMMAND button.

2.In a clear voice, say one of the following commands:

•“Call [contact name]” to call a device contact or SIM contact.

•“Dial [number]” to dial a phone number.

•“Redial” to repeat the last call made.

•“Callback” to return the last call received.