Force10 Networks S2410s manual Show logging buffered, System Log

show logging buffered

Fields in the report include:

Logging Client Local Port—The port on the collector/relay to which syslog messages are sent

CLI Command Logging—The mode for logging CLI commands, whether enabled or disabled

Console Logging—The mode for console logging, whether enabled or disabled

Console Logging Severity Filter—The minimum event severity to display to the console

Buffered Logging—The mode for buffered logging, whether enabled or disabled

Syslog Logging—The mode for logging to configured syslog hosts, whether enabled or disabled. If set to disabled, logging stops to all syslog hosts.

Log Messages Received—The number of messages received by the log process. This includes messages that are dropped or ignored.

Log Messages Dropped—The number of messages that could not be processed

Log Messages Relayed

Log Messages Ignored

Event Log—Table consisting of these columns: File, Line, TaskID, Code, and “d h m s”

File—The file in which the event originated. Line—The line number of the event.

Task Id—The task ID of the event. Code—The event code.

“d h m s”—The time this event occurred in days, hours, minutes, and seconds since system boot..

Note: Event log information is retained across a switch reset.

show logging buffered

	This command displays buffered logging (the System log).
Syntax	show logging buffered
Mode	Privileged Exec
	Fields in the report include:
	Buffered (In-Memory) Logging—The current state of the in-memory log

154 System Log