Force10 Networks S2410s manual Packets Received Successfully

show interface ethernet

Table 8 Fields in Output of show interface ethernet unit/slot/port Command (continued)

Field	Description
Packets Received 1519-1522 Octets	The total number of packets (including bad packets) received
	that were between 1519 and 1522 octets in length inclusive
	(excluding framing bits but including FCS octets).
Packets Received > 1522 Octets	The total number of packets received that were longer than
	1522 octets (excluding framing bits, but including FCS octets)
	and were otherwise well formed.
Packets Received Successfully
Total	The total number of packets received that were without errors
Unicast Packets Received	The number of subnetwork-unicast packets delivered to a
	higher-layer protocol
Multicast Packets Received	The total number of good packets received that were directed
	to a multicast address. Note that this number does not include
	packets directed to the broadcast address.
Broadcast Packets Received	The total number of good packets received that were directed
	to the broadcast address. Note that this does not include
	multicast packets.
Packets Received with MAC Errors
Total	The total number of inbound packets that contained errors
	preventing them from being deliverable to a higher-layer
	protocol
Jabbers Received	The total number of packets received that were longer than
	1518 octets (excluding framing bits, but including FCS octets),
	and had either a bad Frame Check Sequence (FCS) with an
	integral number of octets (FCS Error) or a bad FCS with a
	non-integral number of octets (Alignment Error). Note that this
	definition of jabber is different than the definition in IEEE-802.3
	section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2).
	These documents define jabber as the condition where any
	packet exceeds 20 ms. The allowed range to detect jabber is
	between 20 ms and 150 ms.
Fragments/Undersize Received	The total number of packets received that were less than 64
	octets in length (excluding framing bits but including FCS
	octets).
Alignment Errors	The total number of packets received that had a length
	(excluding framing bits, but including FCS octets) of between
	64 and 1518 octets, inclusive, but had a bad Frame Check
	Sequence (FCS) with a non-integral number of octets.
Rx FCS Errors	The total number of packets received that had a length
	(excluding framing bits, but including FCS octets) of between
	64 and 1518 octets, inclusive, but had a bad Frame Check
	Sequence (FCS) with an integral number of octets
Overruns	The total number of frames discarded as this port was
	overloaded with incoming packets, and could not keep up with
	the inflow
Received Packets not forwarded
Total	A count of valid frames received which were discarded (i.e.
	filtered) by the forwarding process

SFTOS Command Reference for the S2410, Version 2.4.1.0 71