Force10 Networks S2410s manual Ip dhcp bootp automatic, Ip dhcp conflict logging

ip dhcp bootp automatic

ip dhcp bootp automatic

	This command enables the allocation of the addresses to the bootp client. The addresses are
	from the automatic address pool.
	The no version of this command disables the allocation of the addresses to the bootp client.
	The address are from the automatic address pool.
Syntax	ip dhcp bootp automatic
Default	disable
Mode	Global Config

ip dhcp conflict logging

	This command enables conflict logging on DHCP server.
	The no version of this command disables conflict logging on DHCP server.
Syntax	ip dhcp conflict logging
Default	enabled
Mode	Global Config

ip dhcp excluded-address

This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Syntax ip dhcp excluded-address lowaddress [highaddress]

The no version of this command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.

Default none

Mode Global Config

208 DHCP Server Commands