Force10 Networks S2410s manual Set garp timer leaveall, Show garp, Syntax set garp timer leaveall

set garp timer leaveall

set garp timer leaveall

This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.

Syntax set garp timer leaveall 200-6000

Use no set garp timer leaveall to set how frequently Leave All PDUs are generated per port to 1000 centiseconds (10 seconds).

Note: This command has an effect only when GVRP is enabled.

Default

Mode

Command

History

Related

Commands

1000

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Interface Range mode added
interface range	Defines an interface range and accesses the Interface Range mode

show garp

	This command displays Generic Attributes Registration Protocol (GARP) information.
Syntax	show garp
Mode	Privileged Exec and User Exec
	GMRP Admin Mode—This displays the administrative mode of GARP Multicast Registration Protocol
	(GMRP) for the system.
	GVRP Admin Mode—This displays the administrative mode of GARP VLAN Registration Protocol
	(GVRP) for the system

SFTOS Command Reference for the S2410, Version 2.4.1.0 227