Force10 Networks S2410s manual Logging buffered, Syntax logging buffered severitylevel

Chapter 7 System Log

This chapter provides a detailed explanation of the following Syslog commands:

•logging buffered on page 149

•logging buffered wrap on page 150

•logging cli-command on page 150

•logging console on page 151

•logging host on page 151

•logging host reconfigure on page 152

•logging host remove on page 152

•logging persistent on page 152

•logging port on page 152

•logging syslog on page 153

•show logging on page 153

•show logging buffered on page 154

•show logging hosts on page 155

•show logging traplogs on page 156

The commands are of two types:

•Configuration commands configure features and options of the device. For every configuration command there is a show command that displays the configuration setting.

•Show commands display settings, statistics, and other information.

logging buffered

This command enables logging of the System Log to RAM and any other enabled destination, including the console and any enabled syslog server.

Syntax logging buffered [severitylevel]

The severitylevel value is specified through one of the following keywords or the keyword’s representative integer, as shown here: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), informational (6), debug (7).

SFTOS Command Reference for the S2410, Version 2.4.1.0 149