Force10 Networks S2410s manual Protocol group, Except when Gvrp is expected to create the Vlan

protocol group

protocol group

Syntax

Default

Mode

Command History

Related Commands

This command attaches a group ID to the selected VLAN. A group can only be associated with one VLAN at a time. However, the VLAN association can be changed. The referenced VLAN should be created prior to the creation of the protocol-based VLAN, except when GVRP is expected to create the VLAN.

[no] protocol group groupid

The no version of this command removes the group ID from this VLAN.

None

Interface VLAN

Version 2.3	Modified: Removed vlanid parameter and changed mode from VLAN database to
	Interface VLAN.
interface vlan	Configure a VLAN and enter Interface VLAN mode.
show vlan	Displays information about VLANs, either detailed information for a specific
	VLAN or summary information for all configured VLANs.
show port	Displays port information for a selected port or for all ports

protocol vlan group

	This command adds the physical unit/slot/port interface to the protocol-based VLAN
	identified by groupid. A group may have more than one interface associated with it. Each
	interface and protocol combination can only be associated with one group. If adding an
	interface to a group causes any conflicts with protocols currently associated with the group,
	this command will fail and the interface(s) will not be added to the group.
	The referenced VLAN should be created prior to the creation of the protocol-based VLAN
	except when GVRP is expected to create the VLAN.
	The no version of this command removes the interface from this protocol-based VLAN
	group that is identified by this groupid.
Syntax	[no] protocol vlan group groupid
Default	None
Mode	Global Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt,
	such as (conf-if-range-vlan 10-20)#.

SFTOS Command Reference for the S2410, Version 2.4.1.0 127