Force10 Networks S2410s manual Igmp enable interface, Igmp enable global

igmp enable (interface)

igmp enable (interface)

Syntax

Default

Mode

Command History

Related Commands

This command enables IGMP Snooping on a selected interface. If an interface that has IGMP Snooping enabled is enabled for routing or is enlisted as a member of a LAG (port channel), IGMP Snooping functionality will be disabled on that interface. IGMP Snooping functionality will subsequently be re-enabled if routing is disabled or LAG membership is removed from that interface.

[no] igmp enable

disabled

Interface Config; Interface VLAN

Version 2.3	Revised from set igmp. Added Interface VLAN mode.
igmp enable (global)		This command enables IGMP Snooping on the system.
show igmpsnooping		Displays IGMP Snooping status.

igmp enable (global)

This command enables IGMP Snooping on the system. The default value is disabled.

Note: The IGMP application supports the following:

• Global configuration or per interface configuration. Per-VLAN configuration is unsupported in the IGMP Snooping application.

•Validation of the IP header checksum (as well as the IGMP header checksum) and discarding of the frame upon checksum error.

•Maintenance of the forwarding table entries based on the MAC address versus the IP address.

•Flooding of unregistered multicast data packets to all ports in the VLAN.

Syntax

Default

Mode

Command History

Related Commands

[no] igmp enable disabled

Global Config

Version 2.3	Changed from set igmp (system)
igmp enable (interface)		This command enables IGMP Snooping on a selected interface.
show igmpsnooping		Displays IGMP Snooping status.

236 IGMP Snooping Commands