Force10 Networks S2410s manual Set igmp mrouter, Show igmpsnooping, Revised to igmp mrouter

set igmp mrouter

set igmp mrouter

Command
	Version 2.3	Revised to igmp mrouter.
History
Related
	igmp enable (interface)		Enables IGMP Snooping on a selected interface.
Commands
	igmp mrouter (interface)		Configures a selected interface as a multicast router interface.

show igmpsnooping

Syntax

Parameters

Mode

Command History

Report Fields

This command displays IGMP Snooping information. Configured information is displayed whether or not IGMP Snooping is enabled.

show igmpsnooping [unit/slot/port 1-3965]

unit/slot/port	OPTIONAL Display ports on which Multicast Routers are detected.
	Enter interface in unit/slot/port format.
1-3965	OPTIONAL Display VLANS for the specified interface on which
	Multicast Routers are detected.

Privileged Exec

Version 2.3 Modified: 1-3965option added (VLAN ID).

When no parameter is specified, the response contains the following fields:

Admin Mode—Enabled or Disabled

Interfaces Enabled for IGMP Snooping—This is the list of interfaces on which IGMP Snooping is enabled.

Multicast Control Frame Count—This displays the number of multicast control frames that are processed by the CPU.

Vlans enabled for IGMP snooping

When the optional argument unit/slot/port is used, the response is as follows:

IGMP Snooping Admin Mode—This indicates whether or not IGMP Snooping is active on the interface.

Fast Leave Mode—Disable or Enabled

Group Membership Interval—This is the amount of time a switch will wait for a report for a particular group on a particular interface before it sends a query on that interface. This value may be configured

SFTOS Command Reference for the S2410, Version 2.4.1.0 245