Force10 Networks S2410s manual Ip dhcp ping packets, Ip dhcp pool, Lease

ip dhcp ping packets

ip dhcp ping packets

This command is used to specify the number in a range from 2-10, of packets a DHCP server sends to a pool address as part of a ping operation. Setting the number of ping packets to 0 is the same as ‘no ip dhcp ping packets’ and will prevent the server from pinging pool addresses.

Syntax ip dhcp ping packets 0,2-10

Use no ip dhcp ping packets to prevent the server from pinging pool addresses and will set the number of packets to 0.

Default 2

Mode Global Config

ip dhcp pool

This command configures a DHCP address pool name on a DHCP server and enters DHCP Pool Config mode.

Syntax ip dhcp pool name

The no version of this command removes the DHCP address pool. The name should be a previously configured pool name.

Default none

Mode Global Config Mode

lease

	This command configures the duration of the lease for an IP address that is assigned from a
	DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes. If
	infinite is specified, lease is set for 60 days. Days is an integer from 0 to 59. Hours is an
	integer from 0 to 1439. Minutes is an integer from 0 to 86399.
	The no version of this command restores the default value of the lease time for DHCP Server.
Syntax	lease {[days [hours] [minutes]] [infinite]}
Default	1 (day)
Mode	DHCP Pool Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 209