Force10 Networks S2410s manual Show snmpcommunity, Show snmptrap, Syntax show snmptrap

show snmpcommunity

show snmpcommunity

This command displays SNMP community information. Six communities are supported. You can add, change, or delete communities. The switch does not have to be reset for changes to take effect.

The SNMP agent of the switch complies with SNMP Version 1 (for more about the SNMP specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to an external SNMP manager based on the SNMP configuration (the trap receiver and other SNMP community parameters).

Syntax	show snmpcommunity
Mode	Privileged Exec
	Table 15 Fields of show snmpcommunity Command Output
	Field	Description
	SNMP Community	The community string to which this entry grants access. A valid entry is a
	Name	case-sensitive alphanumeric string of up to 16 characters. Each row of this table
		must contain a unique community name.
	Client IP Address	An IP address (or portion thereof) from which this device will accept SNMP
		packets with the associated community. The requesting entity's IP address is
		ANDed with the Subnet Mask before being compared to the IP Address. Note:
		that if the Subnet Mask is set to 0.0.0.0, an IP Address of 0.0.0.0 matches all IP
		addresses. The default value is 0.0.0.0.
	Client IP Mask	A mask to be ANDed with the requesting entity's IP address before comparison
		with IP Address. If the result matches with IP Address then the address is an
		authenticated IP address. For example, if the IP Address = 9.47.128.0 and the
		corresponding Subnet Mask = 255.255.255.0 a range of incoming IP addresses
		would match, i.e. the incoming IP Address could equal 9.47.128.0 -
		9.47.128.255. The default value is 0.0.0.0.
	Access Mode	The access level for this community string
	Status	The status of this community access entry

show snmptrap

This command displays SNMP trap receivers. Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Six trap receivers are simultaneously supported.

Syntax show snmptrap

Mode Privileged Exec

SFTOS Command Reference for the S2410, Version 2.4.1.0 95