Force10 Networks S2410s Show sntp client, This command is used to display Sntp client settings

show sntp client

Field Last Update Time—Time of last clock update

Descriptions

Last Attempt Time—Time of last transmit query (in unicast mode).

Last Attempt Status—Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast mode).

Broadcast Count—Current number of unsolicited broadcast messages that have been received and processed by the SNTP client since last reboot.

Multicast Count—Current number of unsolicited multicast messages that have been received and processed by the SNTP client since last reboot

show sntp client

This command is used to display SNTP client settings.

Syntax	show sntp client
Mode	Privileged Exec
Example

Force10# show sntp client
Client Supported Modes:	unicast broadcast
SNTP Version:	4
Port:	123
Client Mode:	disabled
Force10#

Figure 48 show sntp client Command Example

Field Client Supported Modes—Supported SNTP Modes (broadcast and/or unicast)

Descriptions

SNTP Version—The highest SNTP version the client supports

Port—SNTP Client Port

Client Mode—Configured SNTP Client Mode

Poll Interval—If enabled, the poll interval value for SNTP clients in seconds as a power of two

Poll Timeout—If enabled, the poll timeout value in seconds for SNTP clients

Poll Retry—If enabled, the poll retry value for SNTP clients

SFTOS Command Reference for the S2410, Version 2.4.1.0 219