Force10 Networks S2410s dot1x port-control, dot1x port-control all

172 Security Commands
dot1x port-control
Default 2
Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
dot1x port-control
This command sets the authentication mode to be used on the specified port. The control
mode may be one of the following.
Force-unauthorized—The authenticator PAE unconditionally sets the controlled port to
unauthorized.
Force-authorized—The authenticator PAE unconditionally sets the controlled port to
authorized.
Auto—The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Syntax dot1x port-control {force-unauthorized | force-authorized | auto}
Use no dot1x port-control to set the authentication mode to be used on the specified port
to auto.
Default auto
Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
dot1x port-control all
This command sets the authentication mode to be used on all ports. The control mode may be
one of the following.
Version 2.3 Interface Range mode added
Related
Commands interface range Defines an interface range and accesses the Interface Range mode
Version 2.3 Interface Range mode added
Related
Commands interface range Defines an interface range and accesses the Interface Range mode