Force10 Networks S2410s manual Set garp timer join, Garp Commands, Commands in this sections are

Chapter 13	GARP, GVRP, and GMRP
	Commands

This chapter provides a detailed explanation of the General Attribute Registration Protocol (GARP) commands, including GVRP and GMRP commands. The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

The sections in this chapter are:

•GARP Commands on page 225

•GARP VLAN Registration Protocol (GVRP) Commands on page 228

•GARP Multicast Registration Protocol (GMRP) Commands on page 231

GARP Commands

The commands in this sections are:

•set garp timer join on page 225

•set garp timer leave on page 226

•set garp timer leaveall on page 227

•show garp on page 227

set garp timer join

This command sets the GVRP join time per port and per GARP. Join time is the interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group.

SFTOS Command Reference for the S2410, Version 2.4.1.0 225