Force10 Networks S2410s Downloading from a Tftp Server, Using Factory Defaults, Clear config

Downloading from a TFTP Server

1.Before starting a TFTP server download, configure the management IP address of the switch; see Management IP Address on page 35.

2.To download from a TFTP server, use the following command:

Command Syntax	Command Mode	Purpose
copy tftp://ip address/	Privileged Exec	Set the destination (download) datatype:
{nvram:startup-config		For the SFTOS software image, use system:image.
system:image}		For a configuration file, use nvram:startup-config.
(See copy on page 139.)		The URL is specified as: tftp://ipAddr/filepath (where filepath
		includes the filename, such as S2410/2410software.bin)

Using Factory Defaults

To load factory defaults, use either of the following commands:

Command Syntax	Command Mode	Purpose
clear config	Privileged Exec	Enter y at the prompt that asks if you want to clear all the
		configurations made to the switch.
reload (or cold boot of the switch)	Privileged Exec	Alternatively, use this command to restart the system and
		access the Boot menu, where you can select an option to load
		factory defaults. See Using the Boot Menu on page 32.
		Enter y at the prompt that asks if you want to reset the system.
		Choose to reset the switch or cold boot the switch—both work
		effectively.

38 Quick Start