Force10 Networks S2410s manual Command Prompt hostname Interface #

In this mode, a physical port is set up for a specific logical connection operation. The Interface Config mode provides access to the router interface configuration commands.

Command Prompt: hostname (Interface )#

The resulting prompt sequence for the interface configuration command entered in the Global Configuration mode is shown here:

hostname (Config)# interface /1 hostname (Interface /1)#

DHCP Pool Config Mode. Use the ip dhcp pool pool-namecommand to access the DHCP Pool Config. The mode is used for configuring the switch as a DHCP server.

Line Config Mode. Use this mode to configure the console interface. You may configure the interface from the directly connected console or the virtual terminal used with Telnet.

Command Prompt: hostname (Line)#

Policy Map Mode. Use the policy-map<policy-name>command to access the QoS policy map configuration mode to configure the QoS policy map. The prompt sequence is:

hostname (Config)# policy map <policy name> hostname (Config-policy-map)#

Policy Class Mode. Use the class <class-name>command to access the QoS policy-classmap mode to attach/remove a diffserv class to a policy and to configure the QoS policy class. The prompt sequence is:

hostname (Config policy-map)# class <class name> hostname (Config-policy-classmap)#

Class Map Mode: This mode consists of class creation/deletion and matching commands. The class match commands specify Layer 2, Layer 3 and general match criteria. Use the class-mapclass-map-namecommands to access the QoS class map configuration mode to configure QoS class maps. The prompt sequence is:

hostname (Config)# class-map <class-map-name> hostname (Config class-map)#

Router OSPF Config Mode: In this mode, you can access the router OSPF configuration commands. The prompt sequence is:

hostname (Config)# router ospf hostname (Config router)#

Router RIP Config Mode: In this mode, you can access the router RIP configuration commands. The prompt sequence is:

hostname (Config)# router rip hostname (Config router)#

MAC Access-List Config Mode. Use the MAC Access-List Config mode to create a MAC access-List and to enter the mode containing mac access-list configuration commands. The prompt sequence is:

hostname (Config)#mac-access-list extended name hostname (Config-mac-access-list)#

SFTOS Command Reference for the S2410, Version 2.4.1.0 49