HP BMD00022 manual System configuration, Command /cfg/sys

System configuration

Command: /cfg/sys

[System Menu]
syslog	- Syslog Menu
sshd	- SSH Server Menu
radius	- RADIUS Authentication Menu
tacacs+	- TACACS+ Authentication Menu
ntp	- NTP Server Menu
ssnmp	- System SNMP Menu
access	- System Access Menu
date	- Set system date
time	- Set system time
timezone	- Set system timezone (daylight savings)
olddst	- Set system DST for US
dlight	- Set system daylight savings
idle	- Set timeout for idle CLI sessions
notice	- Set login notice
bannr	- Set login banner
hprompt	- Enable/disable display hostname (sysName) in CLI prompt
bootp	- Enable/disable use of BOOTP
dhcp	- Enable/disable use of DHCP on Mgmt interface
reminders	- Enable/disable Reminders
cur	- Display current system-wide parameters

This menu provides configuration of switch management parameters such as user and administrator privilege mode passwords, browser-based management settings, and management access list.

The following table describes the System Configuration Menu options.

Table 79 System Configuration Menu options

Command	Usage
syslog	Displays the Syslog Menu.
sshd	Displays the SSH Server Menu.
radius	Displays the RADIUS Authentication Menu.
tacacs+	Displays the TACACS+ Menu.
ntp	Displays the Network Time Protocol (NTP) Server Menu.
ssnmp	Displays the System SNMP Menu.
access	Displays the System Access Menu.
date	Prompts the user for the system date.
time	Configures the system time using a 24-hour clock format.
timezone	Configures the time zone where the switch resides. You are prompted to
	select your location (continent, country, region) by the timezone wizard.
	Once a region is selected, the switch updates the time to reflect local
	changes to Daylight Savings Time, etc.
olddst	Enables or disables use of the Daylight Saving Time (DST) rules in effect
	prior to the year 2007. The default value is disabled.

Configuration Menu 111