HP BMD00022 manual IP Access List configuration, Command /cfg/l3/rmap 1-32/alist, Type 12none

Table 137 Route Map Configuration Menu options

Command	Description
type 12none	Assigns the type of OSPF metric. The default is type 1.
	• 1—External routes are calculated using both internal and external
	metrics.
	• 2—External routes are calculated using only the external metrics.
	Type 2 routes have more cost than Type 2.
	• none—Removes the OSPF metric.
prec <1-255>	Sets the precedence of the route map. The smaller the value, the higher
	the precedence. Default value is 10.
enable	Enables the route map.
disable	Disables the route map.
delete	Deletes the route map.
cur	Displays the current route configuration.

IP Access List configuration

Command: /cfg/l3/rmap <1-32>/alist <1-8>

[IP Access List		1 Menu]
nwf	-	Network Filter number
metric	-	Metric
action	-	Set Network Filter action
enable	-	Enable Access List
disable	-	Disable Access List
delete	-	Delete Access List
current	-	Display current Access List configuration

The route map number <1-32>and the access list number <1-8>represent the IP access list you wish to configure. The following table describes the IP Access List Configuration Menu options.

Table 138 IP Access List Configuration Menu options

Command	Description
nwf <1-256>	Sets the network filter number.
metric <1-16777214>none	Sets the metric value in the AS-External (ASE) LSA.
action permitdeny	Permits or denies action for the access list.
enable	Enables the access list.
disable	Disables the access list.
delete	Deletes the access list.
cur	Displays the current Access List configuration.

Configuration Menu 164