HP BMD00022 manual Layer 2 configuration, Command /cfg/l2, Enabledisable, Bpdugrd enabledisable

Layer 2 configuration

Command: /cfg/l2

[Layer 2 Menu]
8021x	- 802.1X Menu
mrst	- Multiple Spanning Tree/Rapid Spanning Tree Menu
stp	- Spanning Tree Menu
fdb	- FDB Menu
trunk	- Trunk Group Menu
thash	- IP Trunk Hash Menu
lacp	- Link Aggregation Control Protocol Menu
hotlink	- Hot Links Menu
vlan	- VLAN Menu
pvstcomp	- Enable/Disable PVST+ compatibility mode
bpdugrd	- Enable/disable BPDU Guard
upfast	- Enable/disable Uplink Fast
update	- UplinkFast station update rate
cur	- Display current layer 2 parameters

The following table describes the Layer 2 Configuration Menu options.

Table 104 L2 Configuration Menu options

Command	Description
8021x	Displays the 802.1X Configuration Menu.
mrst	Displays the Rapid Spanning Tree/Multiple Spanning Tree Protocol
	Configuration Menu.
stp	Displays the Spanning Tree Configuration Menu.
fdb	Displays the Forwarding Database Configuration Menu.
trunk <1-12>	Displays the Trunk Group Configuration Menu for the selected trunk.
thash	Displays the IP Trunk Hash Menu.
lacp	Displays the Link Aggregation Control Protocol Menu.
hotlink	Displays the Hot Links Configuration Menu.
vlan <1-4094>	Displays the VLAN Configuration Menu.
pvstcomp	Enables or disables VLAN tagging of spanning tree BPDUs. The default value
enabledisable	is enabled.
bpdugrd enabledisable	Enables or disables BPDU guard, to avoid spanning-tree loops on ports with
	Port Fast Forwarding enabled.
upfast enabledisable	Enables or disables Fast Uplink Convergence, which provides rapid Spanning
	Tree convergence to an upstream switch during failover.
	When enabled, this feature increases bridge priorities to 65500 for all STGs
	and path cost by 3000 for all external STP ports.
update <10-200>	Configures the station update rate, in packets per second.
	The range is 10-200. The default value is 40.
cur	Displays current Layer 2 parameters.

Configuration Menu 135