HP BMD00022 manual Accessing the Iscli, Boot Options# mode iscli, Switch# boot cli-mode aos

Accessing the ISCLI

To access the ISCLI, enter the following command from the AOS CLI, and reset the switch:

Boot Options# mode iscli

The default command-line interface for the HP 10GbE switch is the AOS CLI. To access the AOS CLI, enter the following command and reset the switch:

>> Switch# boot cli-mode aos

Users can select the CLI mode upon login, if the /boot/prompt command is enabled. Only an administrator connected through the console port can view and enable /boot/prompt. When /boot/prompt is enabled, the first user to log in can select the CLI mode. Subsequent users must use the selected CLI mode, until all users have logged out.

Boot Options Menu 215