Table 185 RMON Alarm Menu options

Command

Description

 

 

revtidx <0-65535>

Configures the rising alarm event index that is triggered

 

when a rising threshold is crossed.

 

The range is from 0 to 65535. The default value is 0.

 

 

fevtidx <0-65535>

Configures the falling alarm event index that is triggered

 

when a falling threshold is crossed.

 

The range is from 0 to 65535. The default value is 0.

 

 

owner <1-127 characters>

Enter a text string that identifies the person or entity that uses

 

this alarm index.

 

The owner can have a maximum of 127 characters.

 

 

delete

Deletes this alarm index.

 

 

cur

Displays the current RMON Alarm parameters.

 

 

 

 

Port mirroring

Command: /cfg/pmirr

[Port Mirroring

Menu]

mirror

-

Enable/Disable Mirroring

monport

-

Monitoring Port based PM Menu

cur

-

Display All Mirrored and Monitoring Ports

The Port Mirroring Configuration Menu is used to configure, enable, and disable the monitored port. When enabled, network packets being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed information about your network performance and usage. Port mirroring is disabled by default.

NOTE: See the “Troubleshooting tools” appendix in the HP 10Gb Ethernet BL-c Switch Application Guide for information on how to use port mirroring.

The following table describes the Port Mirroring Configuration Menu options.

Table 186 Port Mirroring Configuration Menu options

Command

Description

 

 

mirror disableenable

Enables or disables port mirroring

 

 

monport <port number>

Displays port mirroring menu.

 

 

cur

Displays current settings of the mirrored and monitoring ports.

 

 

Configuration Menu 202

Page 202
Image 202
HP BMD00022 manual Port mirroring, Command /cfg/pmirr, Mirror disableenable, Monport port number