Routing Information Protocol information

Command: /info/l3/rip

[RIP Information Menu]

routes

-

Show

RIP

routes

dump

-

Show

RIP

user's configuration

The following table describes the Routing Information Protocol information menu options.

Table 34 RIP information

Command

Usage

 

 

routes

Displays information about RIP routes.

 

 

dump <0-249>

Displays RIP user’s configuration. Enter 0 (zero) for all interfaces.

 

 

RIP Routes information

Command: /info/l3/rip/routes

>> IP Routing# /info/l3/rip/routes

3.0.0.0/8 via 30.1.1.11 metric 4 4.0.0.0/16 via 30.1.1.11 metric 16 10.0.0.0/8 via 30.1.1.2 metric 3 20.0.0.0/8 via 30.1.1.2 metric 2

This table contains all dynamic routes learned through RIP, including the routes that are undergoing garbage collection with metric = 16. This table does not contain directly connected routes and locally configured static routes.

RIP user configuration

Command: /info/l3/rip/dump <1-249>

RIP USER CONFIGURATION : RIP on update 30

RIP Interface 2 : 102.1.1.1, enabled

version 2, listen enabled, supply enabled, default none poison disabled, trigg enabled, mcast enabled, metric 1 auth none, key none

RIP Interface 3 : 103.1.1.1, enabled

version 2, listen enabled, supply enabled, default none poison disabled, trigg enabled, mcast enabled, metric 1

Information Menu 58

Page 58
Image 58
HP BMD00022 manual Routing Information Protocol information, RIP Routes information, RIP user configuration