HP BMD00022 manual Port Statistics Menu, Command /stats/port port number, Sfd clear

Port Statistics Menu options

Table 44 Statistics Menu options

Command	Usage
sfd <clear>	Displays Server Link Failure Detection (SFD) statistics.
	Add the argument, clear, to clear SFD statistics.
clrmp	Clears all Management Processor statistics.
dump	Dumps all switch statistics. Use this command to gather data for tuning and
	debugging switch performance. If you want to capture dump data to a file, set
	your communication software on your workstation to capture session data prior to
	issuing the dump command.

Port Statistics Menu

Command: /stats/port <port number>

[Port Statistics Menu]

8021x	- Show 802.1x stats
brg	- Show bridging ("dot1") stats
ether	- Show Ethernet ("dot3") stats
if	- Show interface ("if") stats
ip	- Show Internet Protocol ("IP") stats
link	- Show link stats
rmon	- Show RMON stats
clear	- Clear all port stats

This menu displays traffic statistics on a port-by-port basis.

The following table describes the Port Statistics Menu options:

Table 45

Command	Usage
8021x	Displays IEEE 802.1X statistics
brg	Displays bridging (“dot1”) statistics for the port.
ether	Displays Ethernet (“dot3”) statistics for the port.
if	Displays interface statistics for the port.
ip	Displays Internet Protocol statistics for the port.
link	Displays link statistics for the port.
rmon	Displays Remote Monitoring (RMON) statistics for the port.
clear	Clears all the statistics on the port.

Statistics Menu 73