HP BMD00022 manual Port Pvrst configuration, Command /cfg/port port number/stp, Edge enabledisable

Port PVRST configuration

Command: /cfg/port <port number>/stp

[Port 1 STP Menu]

edge	- Enable/disable edge port (for PVRST only)
link	-	Set port link type (auto, p2p, or shared; default: auto)
		(for PVRST only)
cur	-	Display current port stp configuration

The following table describes the port PVRST Configuration Menu options.

Table 103 Port PVRST Configuration Menu options

Command	Description
edge enabledisable	Enables or disables this port as an edge port. An edge port is not
	connected to a bridge, and can begin forwarding traffic as soon as the
	link is up. Configure server ports as edge ports (enabled). The default
	value is enabled.
link autop2pshared	Defines the type of link connected to the port, as follows:
	• auto—Configures the port to detect the link type, and automatically
	match its settings.
	• p2p—Configures the port for Point-To-Point protocol.
	• shared—Configures the port to connect to a shared medium (usually
	a hub).
	The default link type is auto.
cur	Displays current port PVRST parameters.

Configuration Menu 134