HP BMD00022 manual Port ACL/QoS configuration, Command /cfg/port port number/aclqos

The following table describes the Gigabit Link Configuration Menu options.

Table 101 Gigabit Link Configuration Menu options

Command	Description
speed 10010000	Sets the link speed.
	All downlink and uplink ports are fixed at 10000 Mbps, and cannot be
	changed. Management port 17 is fixed at 100 Mbps.
mode	Sets the operating mode, as follows:
	•	Full-duplex
	All ports are fixed at full duplex, and cannot be changed.
fctl rxtxbothnone	Sets the flow control. The choices include:
	• Receive (rx) flow control
	• Transmit (tx) flow control
	• Both receive and transmit flow control (default)
	•	No flow control
	Management port 17 is fixed at both, and cannot be changed.
auto onoff	Enables or disables auto-negotiation for the port.
	All downlink and uplink ports are fixed at 10000 Mbps, and cannot be set to
	auto-negotiate.
cur	Displays current port parameters.

Port ACL/QoS configuration

Command: /cfg/port <port number>/aclqos

[Port 20	ACL Menu]
add	- Add ACL or ACL group to this port
rem	-	Remove ACL or ACL group from this port
cur	-	Display current ACLs for this port

The following table describes the port ACL/QoS Configuration Menu options.

Table 102 Port ACL/QoS Configuration Menu options

Command	Description
add acl <1-384> grp <1-384>	Assigns an ACL or ACL Group to the port.
rem acl <1-384> grp <1-384>	Removes an ACL or ACL Group from the port.
cur	Displays current port ACL/QoS parameters.

Configuration Menu 133