HP BMD00022 manual Layer 3 configuration, Command /cfg/l3, Gw 1-4

Layer 3 configuration

Command: /cfg/l3

[Layer 3 Menu]
if	- Interface Menu
gw	- Default Gateway Menu
route	- Static Route Menu
arp	- ARP Menu
frwd	- Forwarding Menu
nwf	- Network Filters Menu
rmap	- Route Map Menu
rip	- Routing Information Protocol Menu
ospf	- Open Shortest Path First (OSPF) Menu
igmp	- IGMP Menu
dns	- Domain Name System Menu
bootp	- Bootstrap Protocol Relay Menu
sm	- ServerMobility Menu
vrrp	- Virtual Router Redundancy Protocol Menu
rtrid	- Set router ID
cur	- Display current IP configuration

The following table describes the Layer 3 Configuration Menu options.

Table 129 L3 Configuration Menu options

Command	Description
if <1-250>	Displays the IP Interface Menu.
gw <1-4, 254>	Displays the IP Default Gateway Menu.
route	Displays the IP Static Route Menu.
arp	Displays the ARP (Address Resolution Protocol) Menu.
frwd	Displays the IP Forwarding Menu.
nwf <1-256>	Displays the Network Filter Configuration Menu.
rmap <1-32>	Displays the Route Map Menu.
rip	Displays the Routing Interface Protocol Menu.
ospf	Displays the OSPF Menu.
igmp	Displays the IGMP Menu.
dns	Displays the IP Domain Name System Menu.
bootp	Displays the Bootstrap Protocol Menu.
sm	Displays the Server Mobility Menu.
vrrp	Displays the Virtual Router Redundancy Configuration Menu.
rtrid <IP address (such	Sets the router ID.
as, 192.4.17.101)>
cur	Displays the current IP configuration.

Configuration Menu 158