HP BMD00022 manual Operations-level port 802.1X options, Command /oper/port port number/8021x

Operations-level port options are used for temporarily disabling or enabling a port.

Table 193 Operations-Level Port Menu options

Command	Description
8021x	Displays the 802.1X Port Menu.
rmon disableenable	Enables or disables Remote Monitoring for the port. RMON must be enabled for
	any RMON configurations to function.
ena	Temporarily enables the port. The port will be returned to its configured
	operation mode when the switch is reset.
	This command does not enable a port that has been disabled by an ekeying
	mismatch error.
dis	Temporarily disables the port. The port will be returned to its configured
	operation mode when the switch is reset.
cur	Displays the current settings for the port.

Operations-level port 802.1X options

Command: /oper/port <port number>/8021x

[802.1X Operation Menu]

reset	-	Reinitialize 802.1X access control on this port
reauth	-	Initiate reauthentication on this port now

Operations-level port 802.1X options are used to temporarily set 802.1X parameters for a port.

Table 194 Operations-Level Port 802.1X Menu options

Command	Description
reset	Re-initializes the 802.1X access-control parameters for the port. The following actions
	take place, depending on the 802.1X port configuration:
	•	force unauth—the port is placed in unauthorized state, and traffic is blocked.
	• auto—the port is placed in unauthorized state, then authentication is initiated.
	•	force auth—the port is placed in authorized state, and authentication is not
		required.
reauth	Re-authenticates the supplicant (client) attached to the port. This command only applies
	if the port’s 802.1X mode is configured as auto.

Operations Menu 209