HP BMD00022 manual Igmp filter definition, Igmp filtering port configuration

IGMP filter definition

Command: /cfg/l3/igmp/igmpflt/filter <1-16>

[IGMP Filter 1 Definition Menu]

range - Set IP Multicast address range action - Set filter action

ena - Enable filter dis - Disable filter del - Delete filter

cur - Display current IGMP filter configuration

The following table describes the IGMP Filter Definition Menu options.

Table 155 IGMP Filter Definition Menu options

Command	Description
range <IP multicast address>	Configures the range of IP multicast addresses for this filter. Enter the
<IP multicast address>	first IP multicast address of the ranger, followed by the second IP
	multicast address of the range.
action allowdeny	Allows or denies multicast traffic for the IP multicast addresses
	specified.
ena	Enables this IGMP filter.
dis	Disables this IGMP filter.
del	Deletes this filter’s parameter definitions.
cur	Displays the current IGMP filter.

IGMP filtering port configuration

Command: /cfg/l3/igmp/igmpflt/port <port number>

[IGMP Port 20 Menu]

filt - Enable/disable IGMP Filtering on port add - Add IGMP filter to port

rem - Remove IGMP filter from port

cur - Display current IGMP Filtering Port configuration

The following table describes the IGMP Port Filtering Configuration Menu options.

Table 156 IGMP Filtering Port Menu options

Command	Description
filt enabledisable	Enables or disables IGMP Filtering on this port.
add <1-16>	Adds an IGMP filter to this port.
rem <1-16>	Removes an IGMP filter from this port.
cur	Displays the current IGMP filter parameters for this port.

Configuration Menu 179