HP BMD00022 Ospf Interface configuration, Ospf Summary Range configuration, Mask IP address mask

OSPF Summary Range configuration

Command: /cfg/l3/ospf/range <1-16>

[OSPF Summary	Range 1	Menu]
addr	- Set IP	address
mask	- Set IP mask
aindex	- Set area index
hide	- Enable/disable hide range
enable	- Enable range
disable	- Disable range
delete	- Delete range
cur	- Display current OSPF summary range configuration

The following table describes the OSPF Summary Range Configuration Menu options.

Table 144 OSPF Summary Range Configuration Menu options

Command	Description
addr <IP Address>	Configures the base IP address for the range. For example, 100.10.1.1.
mask <IP address mask>	Configures the IP address mask for the range.
aindex <0-2>	Configures the area index used by the switch.
hide disableenable	Hides the OSPF summary range.
enable	Enables the OSPF summary range.
disable	Disables the OSPF summary range.
delete	Deletes the OSPF summary range.
cur	Displays the current OSPF summary range.

OSPF Interface configuration

Command: /cfg/l3/ospf/if <1-249>

[OSPF Interface		1 Menu]
aindex	-	Set area index
prio	-	Set interface router priority
cost	-	Set interface cost
hello	-	Set hello interval in seconds
dead	-	Set dead interval in seconds
trans	-	Set transit delay in seconds
retra	-	Set retransmit interval in seconds
key	-	Set authentication key
mdkey	-	Set MD5 key ID
enable	-	Enable interface
disable	-	Disable interface
delete	-	Delete interface
cur	-	Display current OSPF interface configuration

Configuration Menu 170