HP BMD00022 manual Configuration Menu is displayed, Main# /cfg

First-time configuration

Introduction

This chapter describes how to perform first-time configuration and how to change system passwords. To begin first-time configuration of the switch, perform the following steps.

1.Connect to the switch console. After connecting, the login prompt displays.

HP 10Gb Ethernet BL-c Switch

Copyright(C)2006 Hewlett-Packard Development Company, L.P.

Password:

2.Enter admin as the default administrator password.

The system displays the Main Menu with administrator privileges.

[Main Menu]
info	- Information Menu
stats	- Statistics Menu
cfg	- Configuration Menu
oper	- Operations Command Menu
boot	- Boot Options Menu
maint	- Maintenance Menu
diff	- Show pending config changes [global command]
apply	- Apply pending config changes [global command]
save	- Save updated config to FLASH [global command]
revert	- Revert pending or applied changes [global command]
exit	- Exit [global command, always available]
>> Main#

3. From the Main Menu, enter the following command to access the Configuration Menu:

Main# /cfg

The Configuration Menu is displayed.

[Configuration Menu]

sys	- System-wide Parameter Menu
port	- Port Menu
l2	- Layer 2 Menu
l3	- Layer 3 Menu
qos	- QOS Menu
acl	- Access Control List Menu
rmon	- RMON Menu
pmirr	- Port Mirroring Menu
ufd	- Uplink Failure Detection Menu
dump	- Dump current configuration to script file
ptcfg	- Backup current configuration to FTP/TFTP server
gtcfg	- Restore current configuration from FTP/TFTP server
cur	- Display current configuration

First-time configuration 19