HP BMD00022 System Menu is displayed, Enter the current administrator password at the prompt

3.From the Configuration Menu, use the following command to select the System Menu:

>>Configuration# sys

The System Menu is displayed.

[System Menu]
syslog	- Syslog Menu
sshd	- SSH Server Menu
radius	- RADIUS Authentication Menu
tacacs+	- TACACS+ Authentication Menu
ntp	- NTP Server Menu
ssnmp	- System SNMP Menu
access	- System Access Menu
date	- Set system date
time	- Set system time
timezone	- Set system timezone (daylight savings)
olddst	- Set system DST for US
dlight	- Set system daylight savings
idle	- Set timeout for idle CLI sessions
notice	- Set login notice
bannr	- Set login banner
hprompt	- Enable/disable display hostname (sysName) in CLI prompt
bootp	- Enable/disable use of BOOTP
dhcp	- Enable/disable use of DHCP on Mgmt interface
reminders	- Enable/disable Reminders
cur	- Display current system-wide parameters

4.Enter the following command to set the administrator password:

System# access/user/admpw

5.Enter the current administrator password at the prompt:

Changing ADMINISTRATOR password; validation required...

Enter current administrator password:

NOTE: If you forget your administrator password, call your technical support representative for help using the password fix-up mode.

6.Enter the new administrator password at the prompt:

Enter new administrator password:

7.Enter the new administrator password, again, at the prompt:

Re-enter new administrator password:

8.Apply and save the change by entering the following commands:

System# apply

System# save

First-time configuration 21