HP BMD00022 manual ACL Ethernet Filter configuration, Command /cfg/acl/acl 1-384/ethernet

Table 171 ACL Configuration Menu options

Command	Description
egrport <port number>	Configures the ACL to function on egress packets. The egress
	port ACL will not match a Layer 2 broadcast or multicast packet.
	The egress port ACL will not match packets if the destination port
	is a trunk.
action permitdenysetprio <0-7>	Configures a filter action for packets that match the ACL
	definitions. You can choose to permit (pass) or deny (drop)
	packets, or set the 802.1p priority for the packets.
stats ed	Enables or disables the statistics collection for the Access Control
	List.
reset	Resets the ACL parameters to their default values and removes
	the ACL from all ports to which it is assigned.
cur	Displays the current ACL parameters.

ACL Ethernet Filter configuration

Command: /cfg/acl/acl <1-384>/ethernet

[Filtering Ethernet		Menu]
smac	- Set	to filter	on source MAC
dmac	- Set	to filter	on destination MAC
vlan	- Set	to filter	on VLAN ID
etype	- Set	to filter	on ethernet type
pri	- Set to filter		on priority
reset	- Reset all fields
cur	- Display current parameters

This menu allows you to define Ethernet matching criteria for an ACL. The following table describes the Ethernet Filter Configuration Menu options.

Table 172 Ethernet Filter Configuration Menu options

Command	Description
smac <MAC address> <MAC mask>	Defines the source MAC address and MAC mask for
	this ACL. For example:
	00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
dmac <MAC address> <MAC mask>	Defines the destination MAC address and MAC
	mask for this ACL. For example:
	00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
vlan <1-4095> <VLAN mask (0xfff)>	Defines a VLAN number and mask for this ACL.
etype ARPIPIPv6MPLSRARPany0xXXXX	Defines the Ethernet type for this ACL.
pri <0-7>	Defines the Ethernet priority value for the ACL.
reset	Resets Ethernet parameters for the ACL to their
	default values.
cur	Displays the current Ethernet parameters for the
	ACL.
	Configuration Menu 192