HP BMD00022 manual Menu information, Command /stats, Ntp clear, Ufd clear

Statistics Menu

Introduction

You can view switch performance statistics in the user, operator, and administrator command modes. This chapter discusses how to use the CLI to display switch statistics.

Menu information

Command: /stats

[Statistics Menu]

port	- Port Stats Menu
clrports	- Clear stats for all ports
l2	- Layer 2 Stats Menu
l3	- Layer 3 Stats Menu
mp	- MP-specific Stats Menu
acl	- ACL Stats Menu
snmp	- Show SNMP stats
ntp	- Show NTP stats
ufd	- Show Uplink Failure Detection stats
sfd	- Show Server Link Failure Detection stats
clrmp	- Clear all MP related stats
dump	- Dump all stats

The following table describes the Statistics Menu options.

Table 44 Statistics Menu options

Command	Usage
port <port number>	Displays the Port Statistics Menu for the specified port. Use this command to
	display traffic statistics on a port-by-port basis. Traffic statistics are included in
	SNMP Management Information Base (MIB) objects.
clrports	Clear statistics counters for all ports.
l2	Displays the Layer 2 Statistics Menu.
l3	Displays the Layer 3 Statistics Menu.
mp	Displays the Management Processor Statistics Menu. Use this command to view
	information on how switch management processes and resources are currently
	being allocated.
acl	Displays the Access Control List Statistics Menu.
snmp	Displays SNMP statistics.
ntp <clear>	Displays Network Time Protocol (NTP) Statistics.
	You can execute the clear command option to delete all statistics.
ufd <clear>	Displays Uplink Failure Detection statistics.
	Add the argument, clear, to clear UFD statistics.
	Statistics Menu 72