HP BMD00022 manual Https Access configuration, Command /cfg/sys/access/https, Access enabledisable

Table 98 User ID Configuration menu options

Command	Description
ena	Enables the user ID.
dis	Disables the user ID.
del	Deletes the user ID.
cur	Displays the current user ID parameters.

HTTPS Access configuration

Command: /cfg/sys/access/https

[https Menu]
access	- Enable/Disable HTTPS Web access
port	- HTTPS WebServer port number
generate - Generate self-signed HTTPS server certificate
certSave	- save HTTPS certificate
cur	- Display current SSL Web Access configuration

The following table describes the HTTPS Access Configuration Menu options.

Table 99 HTTPS Access Configuration Menu options

Command	Description
access enabledisable	Enables or disables BBI access (Web access) using HTTPS. The default value is
	disabled.
port <TCP port number>	Defines the HTTPS Web server port number.
generate	Allows you to generate a certificate to connect to the SSL to be used during
	the key exchange. A default certificate is created when HTTPS is enabled for
	the first time. The user can create a new certificate defining the information
	that they want to be used in the various fields. For example:
	•	Country Name (2 letter code) [ ]: CA
	•	State or Province Name (full name) [ ]: Ontario
	•	Locality Name (for example, city) [ ]: Ottawa
	•	Organization Name (for example, company) [ ]: Hewlett-Packard
	•	Organizational Unit Name (for example, section) [ ]: ProLiant
	•	Common Name (for example, user’s name) [ ]: Mr Smith
	•	Email (for example, email address) [ ]: info@hp.com
	You must confirm if you want to generate the certificate. It takes approximately
	30 seconds to generate the certificate. Then the switch restarts SSL agent.
certSave	Allows the client, or the Web browser, to accept the certificate and save the
	certificate to Flash to be used when the switch is rebooted.
cur	Displays the current SSL Web Access configuration.

Configuration Menu 130