HP BMD00022 manual Exit or Quit, Traceroute host name IP address max-hops msec delay, Verbose n

Table 4	Global commands
Command		Action
save		Saves the active configuration to backup, and saves the current configuration as active.
		save n saves the current configuration as active, without saving the active configuration
		to backup.
revert		Removes changes that have been made, but not applied.
		revert apply removes all changes that have not been saved.
Exit or	quit	Exits from the command line interface and logs out.
ping		Verifies station-to-station connectivity across the network. The format is:

ping <host name><IP address> [attempts (1-32)> [msec delay]] [-m-mgt-d-data]

•IP address is the hostname or IP address of the device.

•number of tries (optional) is the number of attempts (1-32).

•msec delay (optional) is the number of milliseconds between attempts.

•By default, the -mor -mgtoption for the management port is used. To use data ports, specify the -dor –dataoption.

traceroute	Identifies the route used for station-to-station connectivity across the network. The format
	is:
	traceroute <host name><IP address> [<max-hops> [ msec delay ]]
	•	IP address is the hostname or IP address of the target station.
	•	max-hops(optional) is the maximum distance to trace (1-32 devices).
	•	msec delay (optional) is the number of milliseconds to wait for the response.
pwd	Displays the command path used to reach the current menu.
verbose n	Sets the level of information displayed on the screen:
	• 0 = Quiet: Nothing displays except errors, not even prompts.
	• 1 = Normal: Prompts and requested output are shown, but no menus.
	• 2 = Verbose: Everything is shown. This is the default.
	• When used without a value, the current setting is displayed.
telnet	This command is used to Telnet out of the switch. The format is:
	telnet <hostname> <IP address> [port] [-m-mgt-d-data]
	By default, the -mor -mgtoption for the management port is used. To use data ports,
	specify the -dor –dataoption.
history	Displays the history of the last ten commands.
pushd	Remembers the current location in the directory of menu commands.
popd	Returns to the last pushd location.
who	Displays users who are logged in.

Menu basics 16